Finding The Perfect Color Is Half The Fun Of Unfinished Hardwood Flooring

The only thing better than having your new hardwood floors installed is doing it yourself.  Of course, that is no small order but it can be done.  However, you have to be very careful, and take it one-step at a time.  If you take your time and complete each step correctly, you will soon have a wonderful hardwood floor that you can be proud to walk on.  It all starts with the purchase of your flooring. Check the Sub Floor Unfinished hardwood flooring can be found on the internet at a relatively inexpensive price.  In fact, unfinished hardwood flooring wholesale websites are in abundance on the Internet.

First, ascertain the condition of your sub flooring, if you have one, to determine if it can be used.  If your sub flooring is no good, you can use the prefabricated hardwood planks, called engineered hardwood or even laminate hardwood.  However, most people would not even consider this an option unless it is a rental unit. Floating or Nailed If your sub flooring is bad, you may want to install a sub floor so that you can lay your tongue and groove planks over the top, otherwise, you will have to nail the entire floor down, which is great but is a lot more time and money.  You can see all of the products mentioned when you look for unfinished or hand scraped hardwood flooring for sale on the Internet.  It is the most fun that you can have while doing something constructive.

Choosing unfinished hardwood flooring helps people save money.

flickr by FloorHardWoods

Finding That Perfect Stained Color-Tone
You can save yourself a big step or two by purchasing the finished hardwood planks, however, the wholesale unfinished hardwood flooring is so much more fun because you get to sand it down and stain it yourself, finding that perfect color-tone that is hard to find in a pre-finished hardwood floor.  Do not get me wrong; they do have some beautiful finishes, but it is not the same as if you stain it to that perfect shade for yourself.

The Right Carpet Shampoo For Your Home

Finding the right carpet shampoo for your home can be difficult. Mainly the difficulty lies in the fact that there is probably not one product that will work on all carpeted areas of your home. Different carpet situations call for different carpet shampoo products. Which carpet cleaner you choose depends on many factors including how soon you need to use the carpet again after cleaning, the type of carpet fiber, and how much traffic the carpet sees. All of the carpet cleaner choices out there fall into one of two carpet cleaner categories.

One of the categories of carpet shampoo is dry carpet shampoo. As you might expect, these carpet shampoo products work without the aid or addition of any water or other liquid. You will find dry carpet shampoos that are powders and you will find products that are foams. The way that they work is that you sprinkle on the powder or spray on the foam. You work the particles of the powder or foam into the carpet with a scrub brush and then you wait. The shampoo particles act like a magnet and attract the dirt and any odor causing bacteria in your carpet. Once the offending items are attracted, they are encapsulated by shampoo particles so that they cannot escape. A vacuum cleaner can get rid of everything after you wait about twenty minutes.

You would choose a dry carpet shampoo over the alternatives in several situations. The first situation would be if you did not have access to a carpet cleaning machine. You need a piece of carpet cleaning equipment in order to use the wet carpet shampoos so if you do not have one then the dry carpet cleaner is your only choice. Another situation might be if you were working with a particularly delicate carpet fiber or in an environment that was especially sensitive to moisture. Certain carpets cannot get wet or they will be ruined and you should not introduce water into the car when cleaning car carpets. Therefore, a dry carpet shampoo is sometimes the only option. Finally, you might be forced to use a dry carpet shampoo if you needed to use the room in question within the next few hours. Wet shampoos take too long to dry.

Choosing the best carpet shampoo brand.

flickr by Publicasity Brand Alchemists

The other class of carpet shampoos is liquid carpet shampoos. Liquid carpet shampoos are concentrated carpet cleaners that need to be diluted with water. You cannot use them without dilution and most homeowners find out that you actually need to dilute them more than what is indicated on the package directions. Too much shampoo in the cleaning solution will mean that you will leave behind soap residue on your carpets. Liquid carpet shampoos are applied with carpet cleaning machines like an Electrolux carpet shampooer which scrubs the carpet at the same time. The dirty water and soap is sucked back into the machine and deposited in a waste water reservoir.

Liquid carpet shampoos are the right carpet shampoo to use in several circumstances. The first such circumstance is when you are cleaning high traffic carpets with tough stains. Wet carpet shampoos can have many different types of stain fighters in them that you just do not have with the dry products because of the way they work. In addition, the way you use a wet carpet shampoo lends itself better to getting out tough stains because the carpet cleaning machine can scrub much better than anyone can by hand. A second circumstance would be when you need to clean a carpet very deeply. Even though you work the dry carpet shampoos into the fibers with a brush, they do not penetrate very deep. If you are cleaning a very plush carpet then you need a carpet cleaner that can penetrate very deep and very far and liquid shampoos can do that.

No More Squeaking From Oak Flooring

A lot of people are greatly bothered by the squeaking noise that occasionally comes with using oak floors or other types of plank hardwood flooring in their homes. Contrary to popular opinion, however, this squeaking problem isn’t impossible to solve.

How to Remedy the Squeaking Problem with Oak Floors Flooring

Not all the solutions listed below may be applicable in your case. You would have to first consider your home’s design and structure as certain designs would prevent, for instance, access to your flooring’s sub-floors. Other factors to consider include but aren’t limited to the supplies and tools you prefer to work with as well as your level of knowledge and expertise in DIY home carpentry.

The beauty of having oak wood flooring.

flickr by The Wooden Flooring Co

Use talcum powder. This is the easiest solution of all. Talcum powder may be purchased from your local grocery or hardware store. Maybe you even have it already in your home. In any case, the important thing to remember here is that using talcum power is only effective for getting rid of small or moderate squeaking noise. Extremely loud squeaking would require a more serious or permanent remedy.

To apply talcum powder, simply sweep a good amount of it on top of the affected area, making sure to have the powder swept into your flooring’s grooves. Afterwards, use a rubber mallet to pound the affected areas in order for the powder to settle more securely in place. Make one last sweep for scattered powder to settle into place and to clean the affected areas.

Start shimming. If talcum powder doesn’t do the trick, you might need to shim your floors from below. But this can only be done if you can reach the sub-boards of your flooring. You will also have to insert the necessary amount or number of wedges between them until the squeaking is completely gone.
Please be aware that for floating and glued down oak floors flooring with squeaking problems, the remedies above are not be applicable.